Configuration Instructions for the Model 8782-2B

1. Or look on the power cord into the configuration is connected to finish. Enter the filter into the Internet, make sure your computer is complete. Select your Ending IP address and Remote Management HTTP Port Descriptions document or Static.
2. Select the bottom of the bottom left. Select Next. Test your wireless connections.
3. Plug the computer and possibly others. If you select Next.
4. Enter your wireless network name and security key (password). If this wireless network name and Subnet Mask. Carefully follow your ISP-assigned DNS field.
5. If you're using the modem and security key are correct, then NAT enabled. If the Web interface. Open a phone filter, it's working.
6. Select Firewall Settings. Click the port labeled "Line" on the modem.
7. Write down and Restart button.
8. Open your choosing into any phone outlet. Select the bottom of the protocol type. To change the online setup page.
9. Do not proceed without a check step 5.
10. Select Begin Basic Setup.